Set Time; Select Pre-Set Schedules; Select Pre-Set Schedules - Rain Bird E-6C User Manual

NOTE: In 230 V models, the first flashing “01”
represents the day. You will set the day first, and
then the current month.
4. Press ENTER.
5. The second “01” begins flashing (representing the day of
the month). A cursor will appear under the SET DAY icon.
6. Press + or - to set the current day
(1 through 31).
7. Press ENTER.

Set Time

DIAGRAM 8
1. After setting the correct month and date, leave the
programming dial on DATE/TIME.
2. The time of day appears. In 117 Volt models, the
display will show AM or PM (for example, 12:01 AM).
In 230 Volt models, the time appears in 24-hour format, (for
example 14:01), and the display will not show AM or PM.
A cursor will appear under the SET TIME icon.
3. Press + or - to set the current hour (1 through 12 AM or
PM, or 00:00 through 23:00).
Ec Controller
4. Press ENTER.
5. The minute digits begin flashing.
6. Press + or - to set the current minute
(1 through 59).
7. Press ENTER.

Select Pre-Set Schedules

DIAGRAM 9
Use this procedure if you want to select a pre-set schedule. If
you want to set your own custom watering schedule, go
directly to “Select Program (A, B, and/or C).”
For your convenience, the Ec has three pre-set watering
schedules you can select on any program (A, B, or C).
5 Pr E1 — Waters all stations for five minutes every
•
day at 6 a.m. (06:00), 10 a.m. (10:00), and 2 p.m.
(14:00).
10 Pr E2 — Waters all stations for ten minutes every
•
other day at 6 a.m. (06:00).
10 Pr E3 — Waters all stations for ten minutes every third
•
day at 6 a.m. (06:00).
13