Table of Contents
Advertisement
• VS Module ID: VS Module is a network device that has been registered in the VITEK camera
• Camera No.: Among the cameras of the VS Module select one to set up. (between all,1or2)
• Alarm Control: Determine if Alarm control is to be allowed.
• Audio Control: Determine if Audio Control is to be allowed. (Feature not available on this model)
After finishing the registration process, click Apply button to add the user.
10.5.2. Edit
To edit a user account, select Edit. In this part, you can modify the existing user's name,
password, and access permission. User ID is not allowed to change. Once selecting a user ID to
edit, the procedure is the same as in Add section.
To see existing users, click Select UserId, and select a user to be edited from the dropdown box.
Then you can change the password, name, or access permission, and click Apply button to save
the setting. Setup of Access Permission can be done the same way as in the Add section.
10.5.3. Delete
To delete an existing user, select Delete.
From the list of the users, select a user to delete. Click Delete button to confirm the deletion.
11. Network Configuration
Configuring the network is dependent on how an IP address is assigned in Ethernet-based
environment, which is static IP, dynamic IP (DHCP), or PPPoE.
ENVI Series: VT-IPSN16M
(
Feature not available on this model)
42
Advertisement
Table of Contents
