Conference Incomingmultisitecall Mode; Conference Micunmuteondisconnect Mode; Conference Multipoint Mode; Conference Multistream Mode - Cisco TelePresence SX80 Administrator's Manual

Cisco TelePresence SX80

Introduction

Conference MicUnmuteOnDisconnect Mode

Define if the microphones shall be unmuted automatically when all calls are disconnected.
In a meeting room or other shared resources this may be done to prepare the system for
the next user.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: If muted during a call, let the microphones remain muted after the call is
disconnected.
On: Unmute the microphones after the call is disconnected.

Conference Multipoint Mode

Define how the video system handles multiparty video conferences (ad hoc conferences).
If registered to a Cisco TelePresence Video Communication Server (VCS), the video system
can use its own built-in MultiSite feature. If registered to a Cisco Unified Communications
Manager (CUCM) version 8.6.2 or newer, the video system can use either the CUCM
conference bridge, or the video system's own built-in MultiSite feature. Which option to use,
is set-up by CUCM.
The CUCM conference bridge allows you to set up conferences with many participants. The
built-in MultiSite allows up to five participants (yourself included) plus one additional audio
call.
The built-in MultiSite is optional and may not be available on all video systems.
Requires user role: ADMIN
Default value: Auto
Value space: Auto/CUCMMediaResourceGroupList/MultiSite/Off
Auto: The multipoint method is selected automatically; if no multipoint method is
available, the Multipoint Mode will be set to Off.
CUCMMediaResourceGroupList: Multiparty conferences are hosted by the CUCM
configured conference bridge. This setting is provisioned by CUCM in a CUCM
environment, and should never be set manually by the user.
MultiSite: Multiparty conferences are set up using the built-in MultiSite feature. If
MultiSite is selected when the MultiSite feature is not available, the Multipoint Mode will
automatically be set to Off.
Off: Multiparty conferences are not allowed.
D15328.07 SX80 Administrator Guide CE9.1, JUNE 2017.
Configuration Peripherals Maintenance

Conference MultiStream Mode

The video system supports multistream video for conferences.
Requires user role: ADMIN
Default value: Auto
Value space: Auto/Off
Auto: Multistream will be used when the conference infrastructure supports the feature.
Off: Multistream is disabled.

Conference IncomingMultisiteCall Mode

Select whether or not to allow incoming calls when already in a call/conference.
Requires user role: ADMIN
Default value: Allow
Value space: Allow/Deny
Allow: You will be notified when someone calls you while you are already in a call.
You can accept the incoming call or not. The ongoing call may be put on hold while
answering the incoming call; or you may merge the calls (requires support for multiparty
video conferences).
Deny: An incoming call will be rejected if you are already in a call. You will not be notified
about the incoming call. However, the call will appear as a missed call in the call history
list.
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
99
Administrator Guide
System settings System settings Appendices