Conference [1..1] Incomingmultisitecall Mode - Cisco TelePresence EX60 Administrator's Manual

Cisco TelePresence System EX Series
Contents

Conference [1..1] IncomingMultisiteCall Mode

Select whether or not to allow incoming calls when already in a call/conference.
Requires user role: ADmIn
Value space: <Allow/Deny>
Allow: you will be notified when someone calls you while you are already in a call. you can
accept the incoming call or not. The ongoing call may be put on hold while answering the
incoming call; or you may merge the calls (requires multiSite or multiWay support).
Deny: An incoming call will be rejected if you are already in a call. you will not be notified
about the incoming call. However, the call will appear as a missed call in the call history list.
Conference 1 IncomingMultisiteCall Mode: Allow
Example:
D14726.15 EX Series Administrator Guide TC7.2, AUGUST 2014.
Introduction Web interface System settings System settings
www.cisco.com — Copyright © 2010–2014 Cisco Systems, Inc. All rights reserved.
68
Administrator Guide
Setting passwords Appendices