Choose A Ringtone And Set The Ringtone Volume - Cisco TelePresence SX80 Administrator's Manual

Cisco TelePresence SX80

Introduction

Choose a ringtone and set the ringtone volume

Sign in to the web interface, and navigate to
Personalization.
Change the ringtone
1. Choose a ringtone from the
drop-down list.
2. Click Save to make it the
active ringtone.
Set the ringtone volume
Use the slide bar to adjust the
ringtone volume.
D15328.07 SX80 Administrator Guide CE9.1, JUNE 2017.
Configuration Configuration Peripherals
Setup >
Maintenance
Play back the ringtone
Click the play button ( ► ) to
play back the ringtone.
Use the stop button (  ) to
end the playback.
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
39
Administrator Guide
System settings Appendices
About ringtones
A set of ringtones are installed on the
video system. Use the web interface to
choose a ringtone, and set the ringtone
volume.
You can play back the choosen ringtone
from the web interface. Note that the
ringtone will be played back on the video
system itself, and not on the computer
running the web interface.