Cisco TelePresence SX80 Administrator's Manual page 174

Cisco TelePresence SX80

Introduction
Technical specification
MULTISITE FEATURES
(EMBEDDED MULTIPOINT)
• Five-way 720p30, three-way and four-way
1080p30 MultiSite
• Full individual audio and video transcoding
• Individual layouts in MultiSite continuous presence
• H.323/SIP/VoIP in the same conference
• Support for Presentation (H.239/BFCP) from any
participant at resolutions up to 1080p15
• Best Impression (automatic continuous presence
layouts)
• H.264, encryption and dual stream from any site
• IP downspeeding
• Dial in and dial out
• Conference rates up to 10 Mbps
PROTOCOLS
• H.323 and SIP (dual call stack support)
• ISDN (requires Cisco TelePresence ISDN Link)
EMBEDDED ENCRYPTION
• H.323 and SIP point-to-point
• Standards-based: H.235 v3 and Advanced
Encryption Standard (AES)
• Automatic key generation and exchange
• Supported in dual stream
IP NETWORK FEATURES
• DNS lookup for service configuration
• Differentiated services (QoS)
• IP adaptive bandwidth management (including flow
control)
• Auto gatekeeper discovery
• Dynamic playout and lip-sync buffering
• H.245 DTMF tones in H.323
• RFC 4733 DTMF tones in SIP
• Date and time support via NTP
• Packet loss based downspeeding
• URI dialing
D15328.07 SX80 Administrator Guide CE9.1, JUNE 2017.
Configuration Peripherals
(page 2 of 2)
• TCP/IP
• DHCP (Dynamic Host Configuration Protocol)
• IEEE 802.1x network authentication
• IEEE 802.1q VLAN
• IEEE 802.1p QoS and class of service
• ClearPath
IPV6 NETWORK SUPPORT
• Dual-stack IPv4 and IPv6 for DHCP, SSH, HTTP,
HTTPS, DNS and DiffServ
• Support for static IP address assignment, stateless
autoconfiguration and DHCPv6
CISCO UNIFIED COMMUNICATIONS MANAGER
(requires Cisco UCM version 8.6 or later)
• Native registration with Cisco Unified
Communications Manager (CUCM)
• Basic CUCM provisioning
• Firmware upgrade from CUCM
• Cisco Discovery Protocol and DHCP option 150
support
• Basic telephony features such as hold, resume,
transfer, and corporate directory lookup
SECURITY FEATURES
• Management using HTTPS and SSH
• IP administration password
• Administration menu password
• Disable IP services
• Network settings protection
NETWORK INTERFACES
• One LAN/Ethernet (RJ-45) 10/100/1000 Mbps
• Two LAN/Ethernet (RJ-45) interfaces to be used for
Cisco TelePresence peripherals
OTHER INTERFACES
• Two USB host for future use
• GPIO
Maintenance
SYSTEM MANAGEMENT
• Support for the Cisco TelePresence Management
Suite (TMS)
• Management via embedded Telnet, SSH, XML, and
SOAP
• Full application programming interface (APIs)
• Remote software upload via web server, SCP,
HTTP, and HTTPS
• One RS-232 for local control and diagnostics
• Support for Cisco TelePresence Touch 10
DIRECTORY SERVICES
• Support for local directories (Favorites)
• Corporate directory (through CUCM and Cisco
TMS)
• Server directory supporting LDAP and H.350
(requires Cisco TMS)
• Call history with received, placed and missed calls
with date and time
POWER
• Autosensing power supply
• 100-240 VAC, 50/60 Hz
• Power consumption under normal operating
conditions as defined in IEC 60950-1: 99 W
All specifications are subject to change without notice, system specifics may vary.
All images in these materials are for representational purposes only, actual products may differ.
Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other
countries. A listing of Cisco's trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks
mentioned are the property of their respective owners. The use of the word partner does not imply a partnership
relationship between Cisco and any other company.
December 2016
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
174
Administrator Guide
System settings Appendices Appendices
OPERATING TEMPERATURE AND HUMIDITY:
• Ambient temperature: 32°F to 104°F
(0°C to 40°C)
• Relative humidity (RH): 10% to 90%
STORAGE AND TRANSPORT TEMPERATURE:
• –4°F to 140°F (–20°C to 60°C) at RH 10% to 90%
(non-condensing)
DIMENSIONS
• Width: 442 mm / 17.4 in.
• Height: 44 mm / 1.7 in.
• Depth: 310 mm / 12.2 in.
• Weight: 3.65 kg / 8.05 lbs
APPROVALS AND COMPLIANCE
• Directive 2014/35/EU (Low-Voltage Directive)
• Directive 2014/30/EU (EMC Directive) – Class A
• Directive 2011/65/EU (RoHS)
• Directive 2002/96/EC (WEEE)
• NRTL approved (Product Safety)
• FCC CFR 47 Part 15B (EMC) – Class A
Please check Product Approval Status Database
www.ciscofax.com for approval documents per
country.