Video Settings; Video Activespeaker Defaultpipposition; Video Defaultlayoutfamily Local - Cisco TelePresence SX80 Administrator's Manual

Cisco TelePresence SX80

Introduction

Video settings

Video ActiveSpeaker DefaultPIPPosition

Define the position on screen of the active speaker picture-in-picture (PiP). The setting only
takes effect when using a video layout where the active speaker is a PiP, i.e. the Overlay
layout, or possibly a Custom layout (refer to the Video DefaultLayoutFamily Local setting).
The setting takes effect from the next call onwards; if changed during a call, it will have no
effect on the current call.
Requires user role: ADMIN, INTEGRATOR
Default value: Current
Value space: Current/UpperLeft/UpperCenter/UpperRight/CenterLeft/CenterRight/
LowerLeft/LowerRight
Current: The position of the active speaker PiP will be kept unchanged when leaving a
call.
UpperLeft: The active speaker PiP will appear in the upper left corner of the screen.
UpperCenter: The active speaker PiP will appear in the upper center position.
UpperRight: The active speaker PiP will appear in the upper right corner of the screen.
CenterLeft: The active speaker PiP will appear in the center left position.
CentreRight: The active speaker PiP will appear in the center right position.
LowerLeft: The active speaker PiP will appear in the lower left corner of the screen.
LowerRight: The active speaker PiP will appear in the lower right corner of the screen.
D15328.07 SX80 Administrator Guide CE9.1, JUNE 2017.
Configuration Peripherals Maintenance

Video DefaultLayoutFamily Local

Select which video layout family to use locally.
Requires user role: ADMIN
Default value: Auto
Value space: Auto/Equal/Prominent/Overlay/Single>
Auto: The default layout family, as given in the layout database provided by the system,
will be used as the local layout.
Equal: The Equal layout family will be used as the local layout. All videos have equal size,
as long as there is space enough on the screen.
Prominent: The Prominent layout family will be used as the local layout. The active
speaker, or the presentation if present, will be a large picture, while the other participants
will be small pictures. Transitions between active speakers are voice switched.
Overlay: The Overlay layout family will be used as the local layout. The active speaker,
or the presentation if present, will be shown in full screen, while the other participants
will be small pictures-in-picture (PiP). Transitions between active speakers are voice
switched.
Single: The active speaker, or the presentation if present, will be shown in full screen.
The other participants are not shown. Transitions between active speakers are voice
switched.
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
144
Administrator Guide
System settings System settings Appendices