Conference Incomingmultisitecall Mode; Conference Micunmuteondisconnect Mode; Conference Multipoint Mode; Conference Multistream Mode - Cisco TelePresence SX80 Administrator's Manual

Cisco TelePresence SX80

Introduction

Conference MicUnmuteOnDisconnect Mode

Define if the microphones shall be unmuted automatically when all calls are disconnected.
In a meeting room or other shared resources this may be done to prepare the system for
the next user.
Requires user role: ADMIN
Default value: On
Value space: Off/On
Off: If muted during a call, let the microphones remain muted after the call is
disconnected.
On: Unmute the microphones after the call is disconnected.

Conference Multipoint Mode

Define how the video system handles multiparty video conferences (ad hoc conferences).
If registered to a Cisco TelePresence Video Communication Server (VCS), the video system
can use its own built-in MultiSite feature. If registered to a Cisco Unified Communications
Manager (CUCM) version 8.6.2 or newer, the video system can use either the CUCM
conference bridge, or the video system's own built-in MultiSite feature. Which option to use,
is set-up by CUCM.
The CUCM conference bridge allows you to set up conferences with many participants. The
built-in MultiSite allows up to five participants (yourself included) plus one additional audio
call.
The built-in MultiSite is optional and may not be available on all video systems.
Requires user role: ADMIN
Default value: Auto
Value space: Auto/Off/MultiSite/CUCMMediaResourceGroupList
Auto: The multipoint method is choosen automatically; if no multipoint method is
available, the Multipoint Mode will be set to Off.
Off: Multiparty conferences are not allowed.
MultiSite: Multiparty conferences are set up using the built-in MultiSite feature. If
MultiSite is chosen when the MultiSite feature is not available, the Multipoint Mode will
automatically be set to Off.
CUCMMediaResourceGroupList: Multiparty conferences are hosted by the CUCM
configured conference bridge. This setting is provisioned by CUCM in a CUCM
environment, and should never be set manually by the user.
D15328.04 SX80 Administrator Guide CE8.2, OCTOBER 2016.
Configuration Peripherals Maintenance

Conference MultiStream Mode

The video system supports multistream video for conferences, provided that the
conference infrastructure supports the feature (Cisco TelePresence Server 4.2 or later).
This means that the video system can compose the video streams locally into a conference
layout which utilizes all available screens. This results in an enhanced user experience.
Multistream video is supported only via SIP.
Requires user role: ADMIN
Default value: Off
Value space: Auto/Off
Auto: Use local composition of video streams if the feature is supported by the
conference infrastructure.
Off: Local composition is disabled. Layouts will be transcoded by the conference
infrastructure (Cisco TelePresence Server).

Conference IncomingMultisiteCall Mode

Select whether or not to allow incoming calls when already in a call/conference.
Requires user role: ADMIN
Default value: Allow
Value space: Allow/Deny
Allow: You will be notified when someone calls you while you are already in a call.
You can accept the incoming call or not. The ongoing call may be put on hold while
answering the incoming call; or you may merge the calls (requires support for multiparty
video conferences).
Deny: An incoming call will be rejected if you are already in a call. You will not be notified
about the incoming call. However, the call will appear as a missed call in the call history
list.
www.cisco.com — Copyright © 2016 Cisco Systems, Inc. All rights reserved.
105
Administrator Guide
System settings System settings Appendices