Provisioning Externalmanager Address; Provisioning Externalmanager Alternateaddress; Provisioning Externalmanager Path; Provisioning Externalmanager Protocol - Cisco TelePresence SX80 Administrator's Manual

Cisco TelePresence SX80

Introduction

Provisioning Password

This is the password part of the credentials used to authenticate the video system with the
provisioning server. This setting must be used when required by the provisioning server.
Requires user role: ADMIN, USER
Default value: ""
Value space: String (0, 64)
A valid password.

Provisioning HttpMethod

Select the HTTP method to be used for the provisioning.
Requires user role: ADMIN, USER
Default value: POST
Value space: GET/POST
GET: Select GET when the provisioning server supports GET.
POST: Select POST when the provisioning server supports POST.

Provisioning ExternalManager Address

Define the IP Address or DNS name of the external manager / provisioning system.
If an External Manager Address (and Path) is configured, the system will send a message
to this address when starting up. When receiving this message the external manager /
provisioning system can return configurations/commands to the unit as a result.
When using CUCM or TMS provisioning, the DHCP server can be set up to provide the
external manager address automatically (DHCP Option 242 for TMS, and DHCP Option
150 for CUCM). An address set in the Provisioning ExternalManager Address setting will
override the address provided by DHCP.
Requires user role: ADMIN, USER
Default value: ""
Value space: String (0, 64)
A valid IPv4 address, IPv6 address or DNS name.
D15328.07 SX80 Administrator Guide CE9.1, JUNE 2017.
Configuration Peripherals Maintenance

Provisioning ExternalManager AlternateAddress

Only applicable when the endpoint is provisioned by Cisco Unified Communication Manager
(CUCM) and an alternate CUCM is available for redundancy. Define the address of the
alternate CUCM. If the main CUCM is not available, the endpoint will be provisioned by the
alternate CUCM. When the main CUCM is available again, the endpoint will be provisioned
by this CUCM.
Requires user role: ADMIN, USER
Default value: ""
Value space: String (0, 64)
A valid IPv4 address, IPv6 address or DNS name.

Provisioning ExternalManager Protocol

Define whether to use the HTTP (unsecure communication) or HTTPS (secure
communication) protocol when sending requests to the external manager / provisioning
system.
The selected protocol must be enabled in the NetworkServices HTTP Mode setting.
Requires user role: ADMIN, USER
Default value: HTTP
Value space: HTTPS/HTTP
HTTPS: Send requests via HTTPS.
HTTP: Send requests via HTTP.

Provisioning ExternalManager Path

Define the Path to the external manager / provisioning system. This setting is required
when several management services reside on the same server, i.e. share the same External
Manager address.
Requires user role: ADMIN, USER
Default value: ""
Value space: String (0, 255)
A valid path to the external manager or provisioning system.
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
123
Administrator Guide
System settings System settings Appendices