Choose A Ringtone And Set The Ringtone Volume - Cisco DX70 Administrator's Manual

Hide thumbs Also See for DX70:
Table of Contents

Advertisement

Cisco DX70 and DX80
Introduction

Choose a ringtone and set the ringtone volume

Sign in to the web interface, and navigate to
Personalization, and open the
Ringtones
Change the ringtone
1. Choose a ringtone from the
drop-down list.
2. Click
Save
to make it the
active ringtone.
Set the ringtone volume
Use the slide bar to adjust the
ringtone volume.
D15362.06 DX70 and DX80 Administrator Guide CE9.2, NOVEMBER 2017.
Configuration
Configuration
Peripherals
Setup >
tab.
Maintenance
Play back the ringtone
Click the play button (  ►  ) to
play back the ringtone.
Use the stop button (   ) to
end the playback.
www.cisco.com — Copyright © 2017 Cisco Systems, Inc. All rights reserved.
44
Administrator Guide
System settings
Appendices
About ringtones
A set of ringtones are installed on the
video system. Use the web interface to
choose a ringtone, and set the ringtone
volume.
You can play back the choosen ringtone
from the web interface. Note that the
ringtone will be played back on the video
system itself, and not on the computer
running the web interface.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dx80

Table of Contents