Choose A Ringtone And Set The Ringtone Volume - Cisco TelePresence SX10 Quick Set Administrator's Manual

Cisco TelePresence SX10 Quick Set

Introduction

Choose a ringtone and set the ringtone volume

Sign in to the web interface, navigate to
and open the Ringtones tab.
Change the ringtone
1. Choose a ringtone from the
drop-down list.
2. Click Save to make it the
active ringtone.
Set the ringtone volume
Use the slide bar to adjust the
ringtone volume.
D15330.16 SX10 Administrator Guide CE9.9, OCTOBER 2019.
Configuration Configuration
Setup > Personalization,
Peripherals Maintenance
Play back the ringtone
Click the play button ( ► ) to
play back the ringtone.
Use the stop button (  ) to
end the playback.
70
Administrator Guide
Device settings
About ringtones
A set of ringtones is installed on the
device. Use the web interface to choose
a ringtone, and set the ringtone volume.
You can play back the choosen ringtone
from the web interface. Note that the
ringtone will be played back on the device
itself, and not on the computer running
the web interface.
www.cisco.com — Copyright © 2019 Cisco Systems, Inc. All rights reserved.
Appendices