Unit Km/Mi Conversion; Time Settings; General Parameter Settings; Wheel Diameter Settings - Key-Disp KD51C-U User Manual

Unit km/mi Conversion

◆
U represents unit settings, "1" is mile and "2" is kilometer. The default value is "2".
To convert unit, press the "+" button or the "-" button to choose the desired setting item,
and then press the "i" button to confirm.
To store a changed setting, press the "i" button and then access trip distance clearance
settings.
To store a changed setting, hold the "i" button for 2 s and then exit general settings.

Time Settings

◆
Hour represents time settings , press the "+" button or the "-" button to choose the
options Y/N. The default value is N.
If you choose N, press the "i" button, and then access trip distance clearance settings.
If you choose Y, press the "i" button to enter Time settings, then use the same button
to shift the TIME, press the "+" button or the "-" button to change the number. To store a
changed setting, hold the "i" button for 2 s and then exit general settings.

General Parameter Settings

To access general parameter Settings interface, hold both the "+" and the "-" button for
2 s.
To access Wheel Diameter Settings, then hold both the "-" and the "i" button for 2 s
again.

Wheel Diameter Settings

◆
Ld represents wheel diameter settings. Electable values include 16, 18, 20, 22, 24,
26, 700C and 28.
To change basic settings, press the "+" or the "-" button to increase or decrease until
the desired value is displayed.
To store a changed setting, press the "i" button. Then access the speed-limit settings
interface. The default value is 26 inch.
Mile and Kilometer Conversion Settings Interface
Time Indication
7