Switching Push-Assistance Mode On/Off; Switching The Lighting On/Off; Assistance Level Selection - Key-Disp KD51C-U User Manual

Switching Push-assistance Mode On/Off

◆
To activate the push-assistance function, hold the "-" button always. The E-bike's
drive is activated at a uniform speed of 6 Km/h.
The push-assistance function is switched off as soon as you release the "walk"
button on the operating unit.
■
Push-assistance function may only be used when pushing the E-bike. Danger of
injury when the wheels of the E-bike do not have ground contact while use the push-
assistance function.

Switching the Lighting On/Off

◆
To switch on the lights (front light, rear light and display backlight), briefly press the
" " button. In the same way to press the "

◆Assistance Level Selection

The level of assistance of the E-bike drive when pedaling can be adjusted via the
display. The assistance level can be changed anytime, even during riding.
The default assistance level ranges from level "0" to level "5".The output power is zero on
Level "0". Level "1" is the minimum power. Level "5" is the maximum power.
To increase the assistance level, press the "+" button until the desired assistance
level is displayed; to decrease the assistance level, press the "-" button. The default
value is level "1".
Push-assistance Mode
Switching the Lighting Mode On/Off Interface
Assistance Level "5"
" button, the lighting can be switched off.
4