Magnet Quantity Settings
n represents magnet numbers of PAS disk. The default value is 6.
To change magnet numbers of PAS disk, press the "+" or the "-" button to select
quantity corresponding to PAS disk.
To store a changed setting, hold the "i" button and then return to previous menu.
Speed Sensor (optional)
◆
SPS represents speed sensor settings. The default value is 1
To change speed sensor settings, press the "+" or the "-" button to select the quantity
of magnet head (the range is from 1 to 15).
To store a changed setting, hold the "i" button and then return to previous menu.
Throttle Definition (optional)
◆
Throttle Push-assistance Enable/Disable
HL represents throttle push-assistance function. HL-N represents throttle assistance
push function is disabled. HL-y represents throttle assistance push function is enabled.
The default value is N.
To change throttle push-assistance function, press the "+" or the "-" button to select Y.
To store a changed setting, press the "i" button.
Otherwise, to select N and then access Throttle Level Enable Settings.
The Sensitivity of PAS Settings
PAS Magnet Disk Settings
Speed Sensor Selection
11