Power-On Password Settings; Power-On Password Enable/Disable; Power-On Password Modify - Key-Disp KD51C-U User Manual

Power-on Password Settings

◆
P2, 0000 on the screen means power-on password settings. The password is 1212.
To access the power-on password settings, press the "+" or the "-" button to modify
the value and then press the "i" button to confirm digit one by one until the correct 4-digit
password is completed, and then press the "i" button to access power-on password enable
settings interface, otherwise stay on the password input state.

Power-on Password Enable/Disable

To change power-on password enable/disable settings, press the "+" or the "-" button
to select Y or N.
If it is Y, press the "i" button and then access power-on password modify interface,
otherwise exit the power-on password settings interface. The default value is N.
Y is power-on password enable.
N is power-on password disable.

Power-on Password Modify

When the display shows P3, 0000, to set new power-on password, press the "+" or
the "-" button to modify the value and then press the "i" button to confirm digit one by one
until the new 4-digit password is completed.
To store the new power-on password, hold the "i" button for 2 s and then exit settings.
When switching the E-bike system on next time, the display will show P1,0000, please
input the new password to power on.
Interface of Slowly Settings Up
Power-on Password Entering Interface
Power-on Password Disable Interface
14