■
This setting is the priority version. The speed is the maximum set by manufacturer.
Button Push-assistance Enable/Disable
PUS represents button push-assistance settings. Y represents button push is enabled,
N represents button push is disabled. The default value is Y.
To change button push-assistance settings, press the "+" or the "-" button to choose Y
or N.
To store a changed setting, press the "i" button and then access PAS speed settings.
PAS Speed Settings
To change PAS speed settings, press the "+" or the "-" button to adjust from 20% to
35%.
To store a modified setting, press the "i" button and then access slowly start up.
The default value is 25%.
Slowly Start Up Settings
SSP represents slowly start up.The range is "1-4", "4" is the slowest. The default value
is "1".
To change slowly start up settings, press the "+" or the "-" button to select the desired
value.
To store a modified setting, press the "i" button and then turn to Delay time settings of
battery power page.To return to previous menu, hold the "i" button for 2 s.
Interface of Max Speed Limited Settings
Interface of Push-assistance
Interface of PAS Speed Settings
13