Trip Distance Clearance; Unit Mi/Km Conversion; Wheel Diameter Settings; Speed-Limit Settings - Key-Disp KD58C User Manual

◆

Trip Distance Clearance

Clear Trip means single trip distance clearance. Press the UP or DOWN button to
choose YES or NO to clear the trip distance. The default value is NO. If you choose YES
and press the MODE button to confirm the option, the display will show OK and return
to the general selection settings interface. Otherwise the display will return to the general
selection settings interface directly.
◆

Unit Mi/KM Conversion

Set Unit represents unit settings.
To convert unit, press UP/DOWN to increase or decrease until the desired setting is
displayed.
To store a changed setting, press the MODE button to access trip distance clearance
settings and the display will show OK then returns to general selection settings interface .
The default value is Metric.
◆

Wheel Diameter Settings

Set WD represents wheel diameter settings. Electable values are 16, 18, 20, 22,
24, 26, 700C and 28. The default value is 26 inch.
To change basic settings, press UP/DOWN to increase or decrease until the
desired value is displayed.
To store a changed setting, press the MODE button and the display will show
OK then returns to general selection settings interface .
◆

Speed-limit Settings

Set LS represents limit speed settings. When the running speed is faster than
limit speed, the eBike system will switch off automatically. Limit speed range is
12Km/h to 40Km/h. The default value is 25Km/h.
To change basic settings , press UP/DOWN to increase or decrease until the
Trip distance clearance
Mile and Kilometer Conversion Settings Interface
Wheel Diameter Settings Interface
5