Unit Km/Mi Conversion; Wheel Diameter Settings; Speed-Limit Settings - Key-Disp KD68C User Manual

◆Unit Mile/KM Conversion
Set Unit represents unit settings. To convert unit, press UP/DOWN to increase or
decrease until the desired setting is displayed.
To store a changed setting, press ON/OFF button to confirm and the display will
show ' OK' and return to general settings interface . The default unit is Metric.
Mile and Kilometer Conversion Settings Interface

◆Wheel Diameter Settings

Set WD represents wheel diameter settings. Optional values are 16, 18, 20, 22,
24, 26, 700C and 28. Default diameter is 26 inch.
To change basic settings, press UP/DOWN to increase or decrease until the
desired value is displayed. To store a changed setting, press ON/OFF button and
the display will show ' OK' then return to general settings interface .

◆Speed-limit Settings

Set LS represents limit speed settings. Limit speed range is 12Km/h to 40Km/h.
Limit speed default value is 25Km/h.
To change basic settings, press UP/DOWN to increase or decrease until the
desired value is displayed. To store a changed setting, press ON/OFF button to
confirm the setting. The display will show ' OK' and return to general settings interface.
Wheel Diameter Settings Interface
Limit Speed Settings Interface
6