Unit Km/Mi Conversion; General Parameter Settings; Wheel Diameter Settings - Key-Disp KD51C User Manual

Unit km/mi Conversion

◆
U represents unit settings, "1" is mile and "2" is kilometer. The default value is "2".
To convert a unit, press the "+" button or the "-" button to choose the desired setting
item, and then press the "i" button to confirm.
To store a changed setting, press the "i" button and then access trip distance clearance
settings.
Or, hold the "i" button for 2 s and then exit General Settings.

General Parameter Settings

To access the general
button for 2 s and then hold both the "-" and the "i" button for 2 s again.

Wheel Diameter Settings

◆
Ld represents wheel diameter settings. Electable values include 16, 18, 20, 22, 24,
26, 700C and 28.
To change basic settings, press the "+" or the "-" button to increase or decrease until
the desired value is displayed.
To store a changed setting, press the "i" button. Then access the speed-limit settings
interface. The default value is 26 inch.
Mile and Kilometer Conversion Settings Interface
parameter Settings interface, hold both the "+" and the "-"
Wheel Diameter Settings Interface
Backlight Brightness Settings Interface