Controller Over-current Cut Settings (optional)
◆
CUR represents controller over-current cut settings. CUR value can be changed from
7.0A to 25.0A. The default value is 15A.
To change basic settings, press the "+" or the "-" button to increase or decrease the
value of the current.
To store a changed setting, hold the "i" button and then return to previous menu.
Power Assistant Sensor Settings (optional)
◆
The Direction of PAS Settings
PAS represents power assistant sensor settings.
while "run-b" means back direction. The default value is "run-F".
To change The Direction of Power Assistant Sensor Settings, press the "+" or the "-"
button to select F or b.
To store a changed setting, press the "i" button and then access settings mode of PAS
sensitivity.
The Sensitivity of PAS Settings
SCN represents the sensitivity of PAS settings. The sensitivity value is "2" to "9". "2" is
the strongest, "9" is the weakest. The default value is "2".
To change the sensitivity of PAS settings, press the "+" or the "-" button to select
sensitivity value.
To store a changed setting, press the "i" button and then access magnet disk settings
mode.
PAS Ratio Interface
CUR Settings Interface
Direction of PAS Sensor Settings
10
"run-F" means forward direction,