Default Factory Settings - Smiths Medical CADD-Solis Operator's Manual

References and Troubleshooting

Default Factory Settings

The first time you use the pump, the protocol will
be set to the factory default. If you desire to reset the
pump to the factory default, you may do so at any
time (refer to the Administrator Settings Guide for
more information on how to reset the pump to the
factory default).
52
The following chart details the factory default
parameters:
Programming Units
Continuous Rate
PCA Dose Amount
PCA Dose Lockout
Period
Delivery Limit Method
Reservoir Volume
Reservoir Volume Reset
Value
Reservoir Volume Low
trip point
Reservoir Volume Low
Alert Type
Repeat Reservoir Volume
Empty Alert Type
Clinician Bolus Amount
Maximum Fluid Delivery
Rate (combined bolus
and continuous)
Pump Stopped Alert Type Informational
Upstream Sensor
Downstream Occlusion
Sensitivity
Air Detector Enabled
Air Detector Sensitivity
Date Format
Preventative
Maintenance Reminder
Sound Volume
Unlock Security Code
Clinician Security Code
Administrator Security
Code
Keypad Security
Backlight Intensity
Color Theme
Sound Theme
Key Beeps Enabled
Manual Mode
Programming Code
mL
0 mL/hr
0 mL
1 hour
Not in Use
1 mL
100 mL
5.0 mL
Insistent and One Time
Only
One Time Only
0 mL
175 mL/hr
On
Low
Yes
Low
mm/dd/yy
Off
High
** Text Omitted **
** Text Omitted **
®
-Solis
See your CADD
system administrator
for default security
codes
Code only
3
Black
Standard
Yes
Administrator Code