Restoring Default Settings - HIKVISION LV-N9600 Series User Manual

14.6 Restoring Default Settings

Steps:
1. Enter the Default interface.
Menu > Maintenance > Default
2. Select the restoring type from the following three options.
Restore Defaults: Restore all parameters, except the network (including IP address, subnet mask, gateway, MTU,
NIC working mode, default route, server port, etc.) and user account parameters, to the factory default settings.
Factory Defaults: Restore all parameters to the factory default settings.
Restore to Inactive: Restore the device to the inactive status.
3. Click the OK button to restore the default settings.
The device will reboot automatically after restoring to the default settings.
User Manual of LV-N9600 Series NVR
Figure 14. 9 Restore Defaults
190