HIKVISION LV-N9600 Series User Manual page 38

2. You can edit the IP address, protocol, management port, and other information of the IP camera to be
added.
If the IP camera to add has not been actiavated, you can activate it from the IP camera list on the camera
management interface.
3. (Optional) Check the checkbox of Continue to Add to add other IP cameras.
4. Click Add to add the camera. The successfully added cameras are listed in the interface.
Refer to the following table for the description of the icons
Icon Explanation
Edit basic parameters of the camera
The camera is disconnected; you can
click the icon to get the exception
information of camera.
Play the live video of the connected
camera.
Upgrade the connected IP camera.
For the added IP cameras, the Security status shows the security level of the password of camera: strong
password, weak password and risk password.
User Manual of LV-N9600 Series NVR
Figure 2. 23 Custom Adding IP Camera Interface
Table 2. 1 Description of Icons
37
Icon Explanation
Add the detected IP camera.
Delete the IP camera
Advanced settings of the camera.
Show the security status of the camera
Security to be active/inactive or the password
strength (strong/medium/weak/risk)