Table of Contents
Advertisement
Name
Common Menu
Menu
Single Screen
Multi-screen
Previous Screen
Next Screen
Start/Stop Auto-switch
Start Recording
Add IP Camera
Playback
PTZ
Output Mode
Aux Monitor
Ÿ
The dwell time of the live view configuration must be set before using Start Auto-switch.
Ÿ
If you enter Aux monitor mode and the Aux monitor is not connected, the mouse operation is disabled; you
need to switch back to the Main output with the MAIN/AUX button on the front panel or remote.
Ÿ
If the corresponding camera supports intelligent function, the Reboot Intelligence option is included when
right-clicking mouse on this camera.
3.2.3 Using an Auxiliary Monitor
Certain features of the Live View are also available while in an Aux monitor. These features include:
Single Screen: Switch to a full screen display of the selected camera. Camera can be selected from a
•
dropdown list.
Multi-screen: Switch between different display layout options. Layout options can be selected from a
•
dropdown list.
Next Screen: When displaying less than the maximum number of cameras in Live View, clicking this feature
•
will switch to the next set of displays.
Playback: Enter into Playback mode.
•
PTZ Control: Enter PTZ Control mode.
•
Main Monitor: Enter Main operation mode.
•
User Manual of LV-N9600 Series NVR
Table 3. 3 Mouse Operation in Live View
Description
Quick access to the sub-menus which you frequently visit.
Enter the main menu of the system by right clicking the mouse.
Switch to the single full screen by choosing channel number from the dropdown
list.
Adjust the screen layout by choosing from the dropdown list.
Switch to the previous screen.
Switch to the next screen.
Enable/disable the auto-switch of the screens.
Start continuous recording or motion detection recording of all channels.
Enter the IP Camera Management interface, and manage the cameras.
Enter the playback interface and start playing back the video of the selected
channel immediately.
Enter the PTZ control interface.
Four modes of output supported, including Standard, Bright, Gentle and Vivid.
Switch to the auxiliary output mode and the operation for the main output is
disabled.
Figure 3. 1 Right-click Menu
47
Advertisement
Table of Contents
