Table of Contents
Advertisement
steps. Device ID# 255 is the default universal device identification number shared by the NVRs. You may also
pair an IR Remote to a specific NVR by changing the Device ID#, as follows:
Pairing (Enabling) the IR Remote to a Specific DVR (optional)
You can pair an IR Remote to a specific DVR by creating a user-defined Device ID#. This feature is useful when
using multiple IR Remotes and DVRs.
On the DVR:
1.
Go to General > More Settings.
2.
Type a number (255 digits maximum) into the Device No. field.
3.
On the IR Remote:
4.
Press the DEV button.
5.
Use the Number buttons to enter the Device ID# that was entered into the DVR.
6.
Press Enter button to accept the new Device ID#.
- Unpairing (Disabling) an IR Remote from a DVR
To unpair an IR Remote from a DVR so that the unit cannot control any DVR functions, proceed as follows:
Press the DEV key on the IR Remote. Any existing Device ID# will be erased from the unit's memory and it will
no longer function with the DVR.
User Manual of LV-N9600 Series NVR
Figure 1. 2 Remote Control
16
Advertisement
Table of Contents
