6. Set the operating permission of Local Configuration, Remote Configuration and Camera Configuration for
the user.
Local Configuration
Local Log Search: Searching and viewing logs and system information of NVR.
•
Local Parameters Settings: Configuring parameters, restoring factory default parameters and
•
importing/exporting configuration files.
Local Camera Management: The adding, deleting and editing of IP cameras.
•
Local Advanced Operation: Operating HDD management (initializing HDD, setting HDD property),
•
upgrading system firmware, clearing I/O alarm output.
Local Shutdown Reboot: Shutting down or rebooting the NVR.
•
Remote Configuration
Remote Log Search: Remotely viewing logs that are saved on the NVR.
•
Remote Parameters Settings: Remotely configuring parameters, restoring factory default parameters
•
and importing/exporting configuration files.
Remote Camera Management: Remote adding, deleting and editing of the IP cameras.
•
Remote Serial Port Control: Configuring settings for RS-232 and RS-485 ports.
•
Remote Video Output Control: Sending remote button control signal.
•
Two-Way Audio: Realizing two-way radio between the remote client and the NVR.
•
Remote Alarm Control: Remotely arming (notify alarm and exception message to the remote client) and
•
controlling the alarm output.
Remote Advanced Operation: Remotely operating HDD management (initializing HDD, setting HDD
•
property), upgrading system firmware, clearing I/O alarm output.
Remote Shutdown/Reboot: Remotely shutting down or rebooting the NVR.
•
Camera Configuration
Remote Live View: Remotely viewing live video of the selected camera (s).
•
Local Manual Operation: Locally starting/stopping manual recording and alarm output of the selected
•
camera (s).
Remote Manual Operation: Remotely starting/stopping manual recording and alarm output of the
•
User Manual of LV-N9600 Series NVR
Figure 15. 7 User Permission Settings Interface
197