Only the admin user has the permission to unlock the device.
l
Please configure the pattern first before unlocking. Please refer to Configuring the Unlock Pattern
l
Steps:
1.
Right click the mouse on the screen and select the menu to enter the interface as shown in Figure 2.8.
2.
Draw the pre-defined pattern to unlock to enter the menu operation.
If you have forgotten your pattern, you can select the Forget My Pattern or Switch User option to enter the
l
normal login dialog box.
When the pattern you draw is different from the pattern you have configured, you should try again.
l
If you have drawn the wrong pattern for more than 5 times, the system will switch to the normal login mode
l
automatically.
User Manual of LV-N9600 Series NVR
Figure 2. 7 Draw the Unlock Pattern
Figure 2. 8 Normal Login Dialog Box
27