Table of Contents
Advertisement
A PIR (Passive Infrared) alarm is triggered when an intruder moves within the detector's field of view. The heat
energy dissipated by a person, or any other warm blooded creature such as dogs, cats, etc., can be detected.
Steps:
1.
Enter the VCA settings interface.
Menu> Camera> VCA
2.
Select the camera to configure the VCA.
You can click the checkbox of Save VCA Picture to save the captured pictures of VCA detection.
3.
Select the VCA detection type to PIR Alarm.
4.
Click
to configure the trigger channel, arming schedule and linkage action for the PIR alarm.
5.
Click the Rule Settings button to set the rules. Please refer to the Chapter Face Detection for instructions.
6.
Click Apply to activate the settings.
User Manual of LV-N9600 Series NVR
141
Advertisement
Table of Contents
