Configuring Video Parameters - HIKVISION LV-N9600 Series User Manual

Table of Contents

Advertisement

13.3 Configuring Video Parameters

Purpose:
You can customize the image parameters including the brightness, contrast, saturation, image rotate and mirror
for the live view and recording effect.
Steps:
1. Enter the Image Settings interface.
Menu > Camera >Image
2. Select the camera to set image parameters.
3. Adjust the slider or click on the up/down arrow to set the value of the brightness, contrast or saturation.
4. Select the Enable Rotate function to Clockwise 270 degrees or OFF. When OFF is selected, the image is
restored to original.
5. Select the Mirror Mode to Left-Right, Up-Down, Center or OFF. When OFF is selected, the image is restored
to original.
l The Rotate and Mirror functions must be supported by the connected IP camera.
l The image parameters adjustment can affect both the live view and the recording quality.
6. Click the Apply button to save the settings.
User Manual of LV-N9600 Series NVR
Figure 13. 4 Image Settings Interface
181

Advertisement

Table of Contents
loading

This manual is also suitable for:

Lv-n9600

Table of Contents