Ir Remote Control Operations - HIKVISION LV-N9600 Series User Manual

6
Compound Buttons

1.2 IR Remote Control Operations

The NVR may also be controlled with an IR remote control, shown in Figure 1. 22
Batteries (2×AAA) must be installed before operation.
The IR Remote is set at the factory to control the NVR (using default Device ID# 255) without any additional
User Manual of LV-N9600 Series NVR
Enter numeral "6";
Enter letters "MNO";
6/MNO/PLAY
Playback, for direct access to playback interface.
Enter numeral "7";
Enter letters "PQRS";
7/PQRS/REC:
Open the manual record interface.
Enter numeral "8";
Enter letters "TUV";
8/TUV/PTZ:
Access PTZ control interface.
Enter numeral "9";
Enter letters "WXYZ";
9/WXYZ/PREV:
Multi-channel display in live view.
Enter numeral "0";
Shift the input methods in the editing text field. (Upper and
lowercase, alphabet, symbols or numeric input).
0/A:
Double press the button to switch the main and auxiliary
output.
In menu mode, the direction buttons are used to navigate
between different fields and items and select setting
In playback mode, the Up and Down buttons are used to
speed up and slow down record playing, and the Left and
Right buttons are used to move the recording 30s forwards
DIRECTION
In the image setting interface, the up and down button can
In live view mode, these buttons can be used to switch
The Enter button is used to confirm selection in menu
mode; or used to check checkbox fields and ON/OFF switch.
In playback mode, it can be used to play or pause the video.
ENTER In single-frame play mode, pressing the Enter button will
In auto sequence view mode, the buttons can be used to
pause or resume auto sequence.
15
parameters.
or backwards.
adjust the level bar of the image parameters.
channels.
play the video by a single frame.