HIKVISION LV-N9600 Series User Manual page 59

2. Select patrol No. in the drop-down list of patrol.
3. Click the Set button to add key points for the patrol.
4. Configure key point parameters, such as the key point No., duration of staying for one key point and speed
of patrol. The key point is corresponding to the preset. The Key Point No. determines the order at which
the PTZ will follow while cycling through the patrol. The Duration refers to the time span to stay at the
corresponding key point. The Speed defines the speed at which the PTZ will move from one key point to
the next.
5. Click the Add button to add the next key point to the patrol, or you can click the OK button to save the key
point to the patrol.
You can delete all the key points by clicking the Clear button for the selected patrol, or click the Clear All
button to delete all the key pints for all patrols.
User Manual of LV-N9600 Series NVR
Figure 4. 5 PTZ Settings
Figure 4. 6 Key point Configuration
58