Table of Contents
Advertisement
l To enable Motion, Alarm, M | A (motion or alarm), M & A (motion and alarm) and VCA (Video
Content Analysis) triggered recording and capture, you must configure the motion detection
settings, alarm input settings or VCA settings as well. For detailed information, refer to Chapter 8.1
and Chapter 9.
l The VCA settings are only available to the smart IP cameras.
Repeat the above edit schedule steps to schedule recording or capture for other days in the week. If the
schedule can also be applied to other days, click Copy.
Figure 5. 9 Copy Schedule to Other Days
V. Click OK to save setting and back to upper level menu.
VI. Click Apply in the Record Schedule interface to save the settings.
Draw the schedule:
I.
Click on the color icons, you can choose the schedule type as continuous or event.
User Manual of LV-N9600 Series NVR
Figure 5. 10 Draw the Schedule
73
Advertisement
Table of Contents
