2.
The online cameras with same network segment will be detected and displayed in the camera list.
3.
Select the IP camera from the list and click the
One-touch Adding button to add all cameras (with the same login password) from the list.
Make sure the camera to add has already been activated.
4.
(For the encoders with multiple channels only) check the Channel Port
shown in the following figure, and click OK to add multiple channels.
Ÿ
OPTION 3:
Steps:
1.
On the IP Camera Management interface, click the Custom Adding button to pop up the Add IP Camera
(Custom) interface.
User Manual of LV-N9600 Series NVR
Figure 2. 22 Adding IP Camera Interface
36
button to add the camera. Or you can click the
in the pop-up window, as
checkbox