Playing Back By Smart Playback - HIKVISION LV-N9600 Series User Manual

Playing
Control
Time Bar
Scaling
The playing speed of 256X is supported.

6.1.3 Playing back by Smart Playback

Purpose:
The smart playback function provides an easy way to get through the less effective information. When you select
the smart playback mode, the system will analyze the video containing the motion or VCA information, mark it
with green color and play it in the normal speed while the video without motion will be played in the 16-time
speed. The smart playback rules and areas are configurable.
Before you start:
To get the smart search result, the corresponding event type must be enabled and configured on the IP camera.
Here we take the intrusion detection as an example.
1. Log in the IP camera by the web browser, and enable the intrusion detection by checking the checkbox of it.
You may enter the motion detection configuration interface by Configuration> Advanced Configuration>
Events> Intrusion Detection.
2. Configure the required parameters of intrusion detection, including area, arming schedule and linkage
methods. Refer to the user manual of smart IP camera for detailed instructions.
Steps:
1. Enter Playback interface.
Menu>Playback
User Manual of LV-N9600 Series NVR
tags
Pause/Play
/
Slow forward
30s forward
Next day
Previous day
Previous/Next period
Play the time bar in 1
hour
Play the time bar in 6
hours
Figure 6. 6 Setting Intrusion Detection on IP Camera
/
Play the time bar in 2 hours
92
Reverse play/ Pause
Stop
30s reverse
Fast forward
Play the time bar in 30
minutes (default)
Play the time bar in 24
hours