Table of Contents
Advertisement
2. Parameters Setting for Recording
1)
Select Record tab page to configure. You can configure the stream type, the resolution, and other
parameters on your demand.
Video Encode: select the video encoding to H.265 or H.264.
l
Enable H.264+ Mode: check the checkbox to enable. Once enabled, the Max. Bitrate Mode,
l
Max. Bitrate(Kbps) and Max. Bitrate Range Recommend are not configurable. Enabling it helps
to ensure the high video quality with a lowered bitrate.
The H.265 and H.264+ should be supported by the connected IP camera.
2)
Click the More Settings button to set the advanced parameters for recording and then click OK button
to finish editing.
User Manual of LV-N9600 Series NVR
Figure 5. 3 Recording Parameters
68
Advertisement
Table of Contents
