Example For Configuring Anycast Rp - Huawei Quidway S7700 Configuration Manual - Multicast

Quidway S7700 Smart Routing Switch
Configuration Guide - Multicast

7.12.3 Example for Configuring Anycast RP

Networking Requirements
As shown in
The MSDP peer relationship needs to be set up in the PIM-SM domain to implement RP load
balancing.
Issue 01 (2011-07-15)
#
interface Vlanif103
ip address 10.110.3.1 255.255.255.0
pim sm
#
interface Vlanif104
ip address 10.110.4.1 255.255.255.0
pim sm
igmp enable
#
interface Vlanif600
ip address 192.168.6.2 255.255.255.0
pim sm
#
interface GigabitEthernet1/0/0
port hybrid pvid vlan 103
port hybrid untagged vlan 103
#
interface GigabitEthernet2/0/0
port hybrid pvid vlan 600
port hybrid untagged vlan 600
#
interface GigabitEthernet3/0/0
port hybrid pvid vlan 104
port hybrid untagged vlan 104
#
ospf 1
area 0.0.0.0
network 192.168.6.0 0.0.0.255
network 10.110.3.0 0.0.0.255
network 10.110.4.0 0.0.0.255
#
return
Figure 7-3, a PIM-SM domain contains multiple multicast sources and receivers.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
7 MSDP Configuration
276