Huawei Quidway S7700 Configuration Manual - Multicast page 111

Quidway S7700 Smart Routing Switch
Configuration Guide - Multicast
Value of maximum query response time for IGMP: 10 s
Querier for IGMP: 10.110.1.1 (this router)
# Run the display igmp routing-table command on SwitchA. You can check whether VLANIF
10 is added to the multicast group 225.1.1.1 statically. If the (*, 225.1.1.1) entry exists on
SwitchA, the downstream interface is VLANIF 10, and the protocol type is STATIC, you can
infer that VLANIF 10 is added to the multicast group 225.1.1.1 statically.
<SwitchA> display igmp routing-table
Routing table of VPN-Instance: public net
Total 1 entry
00001. (*, 225.1.1.1)
----End
Configuration Files
l
l
Issue 01 (2011-07-15)
List of 1 downstream interface
Vlanif10 (10.110.1.1),
Protocol: STATIC
Configuration file of SwitchA
#
sysname SwitchA
#
vlan batch 10 11
#
multicast routing-enable
#
interface Vlanif10
ip address 10.110.1.1 255.255.255.0
pim sm
igmp enable
igmp static-group 225.1.1.1
#
interface Vlanif11
ip address 192.168.1.1 255.255.255.0
pim sm
#
interface gigabitethernet 1/0/0
port hybrid pvid vlan 10
port hybrid untagged vlan 10
#
interface gigabitethernet 2/0/0
port hybrid pvid vlan 11
port hybrid untagged vlan 11
#
ospf 1
area 0.0.0.0
network 10.110.1.0 0.0.0.255
network 192.168.1.0 0.0.0.255
#
return
Configuration file of SwitchB
#
sysname SwitchB
#
vlan batch 20 21
#
multicast routing-enable
#
interface Vlanif20
ip address 10.110.2.1 255.255.255.0
pim sm
igmp enable
#
interface Vlanif21
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 IGMP Configuration
92