Checking The Configuration - Huawei Quidway S7700 Configuration Manual - Multicast

Quidway S7700 Smart Routing Switch
Configuration Guide - Multicast
Do as follows on all switchs in the PIM-SM domain:
Procedure
Step 1 Run:
system-view
The system view is displayed.
Step 2 Run:
pim [ vpn-instance vpn-instance-name ]
The PIM view is displayed.
Step 3 Run:
ssm-policy { basic-acl-number | acl-name acl-name }
The SSM group address range is configured.
----End

6.3.7 Checking the Configuration

After basic functions of PIM-SM are configured, you can check information about the BSR, RP,
PIM interface, PIM neighbor, and PIM routing table through commands.
Procedure
l
l
l
l
Issue 01 (2011-07-15)
NOTE
Ensure that the SSM group address range of all switchs in the network is consistent.
Run the display pim [ vpn-instance vpn-instance-name | all-instance ] bsr-info command
to check the BSR in a PIM-SM domain.
Run the display pim [ vpn-instance vpn-instance-name | all-instance ] interface
[ interface-type interface-number | up | down ] [ verbose ] command to check PIM on an
interface.
Run the display pim [ vpn-instance vpn-instance-name | all-instance ] neighbor
[ neighbor-address | interface interface-type interface-number | verbose ]
check a PIM neighbor.
Run the following commands to check the PIM routing table.
– display pim { vpn-instance vpn-instance-name | all-instance } routing-table [ group-
address [ mask { group-mask-length | group-mask } ] | source-address [ mask { source-
mask-length | source-mask } ] | incoming-interface { interface-type interface-
number | register } | outgoing-interface { include | exclude | match } { interface-type
interface-number | register | none } | mode { dm | sm | ssm } | flags flag-value | fsm ]
*
[ outgoing-interface-number [ number ] ]
– display pim routing-table [ group-address [ mask { group-mask-length | group-
mask } ] | source-address [ mask { source-mask-length | source-mask } ] | incoming-
interface { interface-type interface-number | register } | outgoing-interface
{ include | exclude | match } { interface-type interface-number | vpn-instance vpn-
instance-name | register | none } | mode { dm | sm | ssm } | flags flag-value | fsm ]
[ outgoing-interface-number [ number ] ]
– display pim [ vpn-instance vpn-instance-name | all-instance ] routing-table brief
[ group-address [ mask { group-mask-length | group-mask } ] | source-address
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
6 PIM-SM (IPv4) Configuration
*
command to
*
154