Huawei Quidway S7700 Configuration Manual - Multicast page 119

Smart routing switch

Hide thumbs Also See for Quidway S7700:

Table of Contents

Quidway S7700 Smart Routing Switch

Configuration Guide - Multicast

Figure 4-3 Networking diagram of IGMP limit

Configuration Roadmap

The configuration roadmap is as follows:

Data Preparation

To complete the configuration, you need the following data:

Issue 01 (2011-07-15)

192.168.1.1/24

192.168.2.1/24

192.168.3.1/24

Physical interface

Enable multicast on all the switches providing multicast services. The multicast function

must be enabled before you enable IGMP.

Enable PIM-SM on all the VLANIF interfaces of the switches.

Enable IGMP on the VLANIF interfaces connected to user hosts.

Add GE1/0/0 of SwitchA to the multicast group 225.1.1.1 statically to enable user hosts to

receive stable multicast data.

Set the maximum number of IGMP group memberships on SwitchA.

Version of IGMP running between switches and user hosts

Static multicast group address, 225.1.1.1

Maximum number of member relationships in an IGMP group

Huawei Proprietary and Confidential

10.110.1.1/24

10.110.2.1/24

10.110.3.1/24

VLANIF interface