Dell X1000 Series User Manual page 86

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
– Destination File Name — Name of downloaded file on the device.
The possible options are:
Running Configuration
•
the Running Configuration file. The current file is overwritten.
Startup Configuration
•
Startup Configuration file. The current file is overwritten.
New File Name
•
memory. Enter the filename.
5 Click OK to start the upload process.
Backup Files
To back up the Running Configuration, Startup Configuration or software
image file from the switch:
1 Click Switch Management > File Update and Backup > Backup Files.
The current firmware version is displayed.
2 Click Edit.
3 Enter the following IP Format fields:
– Supported IP Format — Select whether IPv4 or IPv6 format is
supported.
– IPv6 Address Type — When the server supports IPv6, this specifies
the type of static address supported. The possible options are:
• Link Local — A Link Local address that is non-routable and used
for communication on the same network only.
• Global — A globally unique IPv6 address; visible and reachable
from different subnets.
4 Enter the following File Type and Protocol fields:
Transfer File Name — Select the file type to be backed up. The
–
possible options are:
Running Configuration
•
the Running Configuration file. The current file is overwritten.
Startup Configuration
•
Startup Configuration file. The current file is overwritten.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 8 / 9 / 1 6 - F O R P R O O F O N L Y
86
Switch Management
Guide\Dell_Astute_SwitchManagement.fm
— Check to download commands into the
— Check to copy commands into a file in flash
— Check to download commands into the
— Check to download commands into
— Check to download commands into