Dell X1000 Series User Manual page 199

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
– Admin Auto Negotiation — Enable/disable auto-negotiation, which is
a protocol between two link partners that enables a LAG to advertise
its transmission rate, duplex mode and flow control abilities to its
partner.
– Current Auto Negotiation — Displays the current auto-negotiation
setting.
– Admin Advertisement — If auto-negotiation is enabled, select the
auto-negotiation setting the LAG advertises. The possible options are:
• Max Capability — All LAG speeds and Duplex mode settings are
accepted.
• 10 F — The LAG advertises for a 10 Mbps speed LAG and full
duplex mode setting.
• 100 F — The LAG advertises for a 100 Mbps speed LAG and full
duplex mode setting.
• 1000 F — The LAG advertises for a 1000 Mbps speed LAG and
full duplex mode setting.
– Current Advertisement — Displays the speed that the LAG advertises
to its neighbor LAG to start the negotiation process. The possible field
values are those specified in the Admin Advertisement field.
– Neighbor Advertisement — Displays the neighboring LAG
advertisement settings. The field values are identical to the Admin
Advertisement field values.
– Admin Flow Control — Enable/disable flow control on the LAG.
Flow Control mode is effective on the ports operating in Full Duplex
in the LAG. The possible options are:
• Enable — Enables flow control on the LAG (default).
Disable — Disables flow control on the LAG.
•
Auto Negotiation — Enables the auto-negotiation of flow control
•
on the LAG.
– Current Flow Control — Displays the current Flow Control setting.
LACP Parameters
Configuring LACP LAGs involves configuring LACP global and port
parameters, such as LACP system priority, timeout, and port priority.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 8 / 9 / 1 6 - F O R P R O O F O N L Y
Guide\Dell_Astute_Network_Admin_STP.fm
Network Administration: Spanning Tree and LAG
199