Dell X1000 Series User Manual page 269

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
To define IPv6-based ACLs:
1 Click Network Administration > Security > ACL and ACE > IPv6
Based ACL.
A list of all of the currently defined IPv6-based ACLs is displayed.
2 To add a new ACL, click Edit, Add.
3 Enter the name of the new ACL. Names are case-sensitive.
IPv6-Based ACEs
To add a rule to an IPv6-based ACL:
1 Click Network Administration > Security > ACL and ACE > IPv6
Based ACE.
The currently-defined rules for the selected ACL are displayed.
2 To add a rule click Edit, Add.
3 Select a user-defined ACL for which a rule is being created.
4 Enter the following fields:
New Rule Priority — Enter the ACE priority that determines which
–
ACE is matched to a packet, based on a first match.
– Protocol Select from List — Select to create an ACE, based on a
specific protocol. The following options are available:
• ICMP — Internet Control Message Protocol (ICMP). The ICMP
allows the gateway or destination host to communicate with the
source host. For example, to report a processing error.
• TCP — Transmission Control Protocol (TCP). Enables two hosts
to communicate and exchange data streams. TCP guarantees
packet delivery, and guarantees packets are transmitted and
received in the order that they are sent.
• UDP — User Datagram Protocol (UDP). Communication
protocol that transmits packets but does not guarantee their
delivery.
• IPV6 — Matches the packet to the IPV6 protocol.
– Protocol ID To Match — Enter a protocol.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 8 / 9 / 1 6 - F O R P R O O F O N L Y
Guide\Dell_Astute_Network_Admin_Security.fm
Network Administration: Security
269