Dell X1000 Series User Manual page 202

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Private VLAN Host — The port is an isolated port
•
– Current Reserved VLAN — Displays the VLAN currently designated
as the reserved VLAN.
– Reserve VLAN for Internal Use (1-4094) — Enter the VLAN that will
be used when assigning IP Address on a port, or select None.
– PVID — Assigns a VLAN ID to untagged packets. The possible VLAN
IDs are 1-4095. VLAN 4095 is defined as per standard and industry
practice, as the discard VLAN. Packets classified to this VLAN are
dropped.
– VLAN List — Enter the VLAN(s) to which this LAG belongs.
Click Add/Remove to move the LAG to the VLAN list together with
its type.
NOTE:
In Access mode, a port can only be a member in a single VLAN, so before
adding an access port to the VLAN, the VLAN the port is currently a member
in should be manually removed (by selecting it from the VLAN list and clicking
the remove button).
– Membership — Packet tagging on VLAN. The possible options are:
• Tagged — The LAG is a member of a VLAN. All packets
forwarded to the LAG are tagged. The packets contain VLAN
information.
• Untagged — The LAG is a member of a VLAN. Packets forwarded
to the LAG are untagged.
• Forbidden — The LAG is denied membership to a VLAN.
– Frame Type — Packet type accepted by the LAG. The possible options
are:
• Admit All — Tagged and untagged packets are both accepted by
the LAG.
• Admit Tagged Only — Only tagged packets are accepted by the
LAG.
• Admit Untagged Only — Only untagged packets are accepted on
the LAG.
Ingress Filtering — Enable/disable Ingress filtering by the LAG.
–
Ingress filtering discards packets that are destined to VLANs of which
the specific LAG is not a member.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 8 / 9 / 1 6 - F O R P R O O F O N L Y
202
Network Administration: Spanning Tree and LAG
Guide\Dell_Astute_Network_Admin_STP.fm