Dell X1000 Series User Manual page 376

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Symbol Errors: 0
Received Pause Frames: 0
Transmitted Pause Frames: 0
The following table describes the fields shown in the display.
Field
InOctets
InUcastPkts
InMcastPkts
InBcastPkts
OutOctets
OutUcastPkts
OutMcastPkts
OutBcastPkts
FCS Errors
Single Collision Frames
Multiple Collision Frames
SQE Test Errors
Deferred Transmissions
Late Collisions
Excessive Collisions
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 8 / 9 / 1 6 - F O R P R O O F O N L Y
376
CLI
Guide\Dell_Astute_CLI_new.fm
Description
Number of received octets.
Number of received Unicast packets.
Number of received Unicast packets.
Number of received broadcast packets.
Number of transmitted octets.
Number of transmitted Unicast packets.
Number of transmitted Unicast packets.
Number of transmitted Broadcast packets.
Number of frames received that are an integral
number of octets in length but do not pass the FCS
check.
Number of frames that are involved in a single
collision, and are subsequently transmitted
successfully.
Number of frames that are involved in more than one
collision and are subsequently transmitted
successfully.
Number of times that the SQE TEST ERROR is
received. The SQE TEST ERROR is set in
accordance with the rules for verification of the SQE
detection mechanism in the PLS Carrier Sense
Function as described in IEEE Std. 802.3, 2000
Edition, section 7.2.4.6.
Number of frames for which the first transmission
attempt is delayed because the medium is busy.
Number of times that a collision is detected later
than one slotTime into the transmission of a packet.
Number of frames for which transmission fails due to
excessive collisions.