Network Administration: Dhcp Server; Overview - Dell X1000 Series User Manual

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Network Administration: DHCP
Server
The Dynamic Host Configuration Protocol (DHCP) Server feature enables
you to configure the device as a DHCPv4 server.
This section covers the following topics:
•

Overview

• DHCP Server Properties
• Network Pool
• Static Hosts
• Address Binding
• Excluded Addresses
Overview
A DHCPv4 server is used to assign IPv4 address and other information to
another device (DHCP client)
The DHCPv4 server allocates IPv4 addresses from a user-defined pool of IPv4
addresses.
These can be in the following modes:
• Static Allocation—The hardware address or client identifier of a host is
manually mapped to an IP address. This is done in the
Dynamic Allocation—A client obtains a leased IP address for a specified
•
period of time (that can be infinite). If the DHCP client does not renew
the allocated IP Address, the IP address is revoked at the end of this period,
and the client must request another IP address. This is done in the
Network Pool
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 8 / 9 / 1 6 - F O R P R O O F O N L Y
Guide\Dell_Astute_Network_Admin_DHCP_Server.fm
page.

Network Administration: DHCP Server

19
Static Hosts page.
309