Dell X1000 Series User Manual page 133

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
– Multicast Packets — Number of good Multicast packets received
during the sampling interval.
– CRC Align Errors — Number of packets received during the sampling
session, with a length of between 64-1632 octets, who had a bad
Check Sequence (FCS) with an integral number of octets, or a bad
FCS with a non-integral number.
– Undersize Packets — Number of packets, having less than 64 octets,
received during the sampling session.
– Oversize Packets — Number of packets having more than 1632 octets,
received during the sampling session.
– Fragments — Number of packets, having less than 64 octets and
having a FCS, received during the sampling session.
– Jabbers — Number of packets, having more than 1632 octets and who
had an FCS, received during the sampling session.
– Collisions — Estimated number of packet collision that occurred
during the sampling session. Collisions are detected when repeater
port detects two or more stations transmitting simultaneously.
Utilization — Estimated main physical layer network usage on an
–
interface during the session sampling. The value is stated in
hundredths of a percent.
Threshold and Events
Events are actions that are performed when an alarm is generated.
An event can be any combination of logs/traps. If the action includes logging,
then the events are logged in the
To define a monitoring event:
1 Click Statistics and Diagnosis > Monitoring (RMON).
2 Click Threshold and Events.
3 Click Add.
4 Enter the fields:
Entry — Displays a new event number.
–
– Interface Type — Select port or LAG.
– Interface to Monitor — Select the interface to monitor.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 8 / 9 / 1 6 - F O R P R O O F O N L Y
Guide\Dell_Astute_Statistics_and_Diagnostics.fm
Logs page.
Statistics and Diagnostics
133