Dell X1000 Series User Manual page 194

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Add — Add these VLANS to the MST instance.
•
• Remove — Remove these VLANS from the MST instance.
MSTP Instance Settings
To configure MSTP instances:
1 Click Network Administration > Spanning Tree and LAG > MSTP
Instance Settings
The MSTP instances and their associated VLANs are displayed.
2 Select an Instance ID.
3 Enter the Bridge Priority (0-61440) of this bridge for the selected MSTP
instance.
4 The following fields are displayed:
– Included VLANs — Displays VLANs included in this instance.
Designated Root Bridge ID — Priority and MAC address of the Root
–
Bridge for the MST instance.
– Root Port — Root port of the selected instance.
– Root Path Cost — Root path cost of the selected instance.
– Bridge ID — Bridge priority and the MAC address of this switch for
the selected instance.
– Remaining Hops — Number of hops remaining to the next
destination.
MSTP Interface Settings
To assign interfaces to MSTP instances:
1 Click Network Administration > Spanning Tree and LAG > Spanning
Tree > MSTP Interface Settings.
MSTP interface settings for the selected instance is displayed.
2 Click Edit.
3 Select an instance, and enter the fields:
Interface — Assign either ports or LAGs to the selected MSTP
–
instance.
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 8 / 9 / 1 6 - F O R P R O O F O N L Y
194
Network Administration: Spanning Tree and LAG
Guide\Dell_Astute_Network_Admin_STP.fm
.