FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Guide\Dell_Astute_Network_Admin_DHCP_Snooping&Relay.fm
To query and add IP addresses to the Binding database:
1 Click Network Administration > DHCP Snooping > Binding Database.
A list of the database entries is displayed.
2 To query the database, enter query criteria and click Query. Database
entries matching the query are displayed.
3 To add an entry, click Edit, Add, and enter the fields:
–
Type — Select the entry type. The possible options are:
•
Dynamic —IP address was dynamically configured.
•
Static —IP address was statically configured.
–
MAC Address — Enter the MAC address to be recorded in the entry.
–
VLAN ID — Select the VLAN ID to which the IP address is
associated in the entry.
–
IP Address — Enter the IP address to be recorded in the entry.
–
Interface Type — Select the type and port or LAG to be recorded in
the entry.
Interface — Select the interface.
–
Lease Time — If the entry is dynamic, enter the amount of time that
–
the entry will be active in the DHCP Database. If there is no Lease
Time, check Infinite.
DHCP Relay
This section describes DHCP relay.
It contains the following sections:
•
Overview
•
Global Settings
•
Option 82
•
Interface Settings
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 8 / 9 / 1 6 - F O R P R O O F O N L Y
306
Network Administration: DHCP Snooping and DHCP Relay