Address Binding - Dell X1000 Series User Manual

FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\User
Mixed
•
used to register and resolve NetBIOS names. M-node first uses b-
node; then, if necessary, p-node. M-node is typically not the best
choice for larger networks because its preference for b-node
Broadcasts increases network traffic.
Hybrid
•
When configured to use h-node, a computer always tries p-node
first and uses b-node only if p-node fails. This is the default.
– SNTP Server — Enter the IP address of the time server for the DHCP
client. This is DHCP option 4.
– Next Server —Enter the IP address of the TFTP/SCP server from
which the configuration file is downloaded. This is DHCP option
siaddr.
– Next Server Name — Enter the name of the TFTP/SCP server. This is
DHCP option 66.
– Image File Name (file/Option 67)—Enter the name of the file that
is used as a configuration file. This is DHCP option 67.

Address Binding

Use the Address Binding page to view and remove the IP addresses allocated
by the device and their corresponding MAC addresses.
To view and/or remove address bindings:
1 Click Network Administration > DHCP Server > Address Binding.
The following fields for the address bindings are displayed:
– IP Address—The IP addresses of the DHCP clients.
– Client Identifier/MAC Address—A unique identification of the
client specified as a MAC Address or in hexadecimal notation, e.g.,
01b60819681172.
– Lease Expiration—The lease expiration date and time of the host's
IP address or Infinite is such was the lease duration defined.
– Type—The manner in which the IP address was assigned to the client.
The possible options are:
D E L L C O N F I D E N T I A L – P R E L I M I N A R Y 8 / 9 / 1 6 - F O R P R O O F O N L Y
Guide\Dell_Astute_Network_Admin_DHCP_Server.fm
—A combination of b-node and p-node communications is
—A hybrid combination of b-node and p-node is used.
Network Administration: DHCP Server
315