STELVIO 4V - 1200
•
Remove the two rocking levers from
the cam cap.
•
Remove the two rods.
•
Unscrew and remove the four screws.
•
Remove the U-bolt.
•
Remove the camshaft.
•
Remove the bowls from the cam cap,
and mark their position so as not inter-
change them when refitting.
Removing the rocker arms
CAUTION
WHEN REMOVING THE COMPONENTS, MARK THE POSITION OF EACH PART VERY CARE-
FULLY IN ORDER TO PLACE THEM IN THEIR ORIGINAL POSITION UPON FITTING.
Engine
ENG - 137